/Products/extraction of copper using column leaching

1
2

extraction of copper using column leaching

Reactor and column leaching studies for extraction of

2016-10-1 In addition to purification, solvent extraction studies were also essential to enrich the copper concentration in the solution as the concentrations of copper in the leach liquors are in the level of 0.54 g/L (column leaching) and 0.74 g/L (reactor leaching). The extraction of copper was carried out in a single stage using 10% LIX 622N at A:O ratio of 10:1.

Reactor and column leaching studies for extraction of

2020-10-7 maximum extraction of copper through chemical reactor and perco-lation column leaching. The effects of various process parameters such as acid concentration, temperature, oxidant and time on recov-ery of copper using reactor leaching have been discussed and com-pared. A two step sequential percolation column leaching method

extraction of copper using column leaching

Jul 01, 2010· The extraction of copper from acidic leach solution with the aldoxime Acorga M5640 using a pulsed sieve plate column has been investigated. The pregnant leach solution was produced through pressure leaching of an industrial sphalerite concentrate that contained zinc, iron, copper, indium and other minor elements.

Reactor and column leaching studies for extraction of

A maximum of 91% Cu extraction can be achieved while leaching the pulverized sonic drilled sample at 90 °C for 3 h. On the other hand, column leaching studies at 1 kg scale showed 65–70% Cu extraction with an acid concentration of 2.7% (v/v) for both the samples.

Extraction of copper from acidic leach solution with

2010-7-1 The extraction of copper from acidic leach solution with the aldoxime Acorga M5640 using a pulsed sieve plate column has been investigated. The pregnant leach solution was produced through pressure leaching of an industrial sphalerite concentrate that contained zinc, iron, copper, indium and other minor elements.

Agitation and column leaching studies of oxidised

2017-9-1 It is with this in mind that the present work was initiated in an attempt to seek ways of improving cobalt extraction during the H 2 SO 4 column leaching of copper-cobalt-bearing ores using sodium metabisulphite as the reducing agent while minimising the amount of unreacted SO 2 and the amount of sulphuric acid used. 2. Material and methods2.1. Materials

Copper recovery using leach/solvent extraction

2009-8-27 leaching oxide copper with ammonia, but neither solution was economical. a molecule that extracted copper well from typical dump leach liquors (pH ~1.8) had to be built. The reagent LIX 64, containing the ketoxime LIX Copper recovery using leach/solvent extraction/electrowinning technology: Forty years of innovation, 2.2 million tonnes of copper annually

STUDIES ON THE CURING AND LEACHING KINETICS OF

2017-5-27 accelerate the extraction kinetics of copper ores and is widely used in copper operations. The curing process involves the addition of a highly concentrated sulfuric acid to the copper

Using of leaching reactant obtained from mill scale in

2021-5-20 The optimum leaching conditions were determined as 105 °C leaching temperature, 120 min leaching time, 1/25 g/ml solid-liquid ratio, and 400 rpm stirring speed (magnetic stirrer). In these conditions, the copper extraction rate was 95.04%, and the total iron concentration in the solution was determined as 75.84 g/l.

SEPARATION OF COPPER FROM A LEACHING SOLUTION

Yang et al. (2011) analyzed copper leaching from spent PCBs. The study reported copper extraction higher than 90 wt.% using sulfuric acid, hydrogen peroxide and a solid: liquid ratio of 1:10(g/mL), after 3h at 23ºC. According to Birloaga et al. (2013) 90 wt.% of copper can be leached from PCBs after two leaching

Reactor and column leaching studies for extraction of

2020-10-7 Reactor and column leaching studies for extraction of copper from two low grade resources: A comparative study Sandeep Panda a, Geetanjali Mishraa, Chinmaya Kumar Sarangia, Kali Sanjay a,⁎,TondepuSubbaiaha,b, Subir Kumar Dasa, Kadambini Sarangia, Malay Kumar Ghosha, Nilotpala Pradhana,BaradaKantaMishraa a CSIR—Institute of Minerals and Materials Technology,

Copper Extraction from Flue Dust of Electronic Waste by

2020-10-23 Copper Extraction from Flue Dust of Electronic Waste by Electrowinning and Ion Exchange Process method involved ﬁlling the column with resin then ﬂowing the leaching solution into the column at constant ﬂow rate (70 mL/h). The second was a dynamic method, using

Copper recovery using leach/solvent extraction

2009-8-27 leaching oxide copper with ammonia, but neither solution was economical. a molecule that extracted copper well from typical dump leach liquors (pH ~1.8) had to be built. The reagent LIX 64, containing the ketoxime LIX Copper recovery using leach/solvent extraction/electrowinning technology: Forty years of innovation, 2.2 million tonnes of

Bacterial and chemical leaching of copper-containing

2019-1-25 Ag was extracted by cyanidation methods again in flasks as well as column leaching tests. Results showed that copper extraction is up to 95% when using bioleaching in the flask, 83% in the case of Fe3+ with sulfuric acid and 76% for sulfuric acid. Furthermore, subsequent extraction of Ag reaches 97% for bioleaching and 92% for chemical leaching.

SEPARATION OF COPPER FROM A LEACHING SOLUTION

Yang et al. (2011) analyzed copper leaching from spent PCBs. The study reported copper extraction higher than 90 wt.% using sulfuric acid, hydrogen peroxide and a solid: liquid ratio of 1:10(g/mL), after 3h at 23ºC. According to Birloaga et al. (2013) 90 wt.% of copper can be leached from PCBs after two leaching

STUDIES ON THE CURING AND LEACHING KINETICS OF

2017-5-27 accelerate the extraction kinetics of copper ores and is widely used in copper operations. The curing process involves the addition of a highly concentrated sulfuric acid to the copper

Use of mesophilic and thermophilic bacteria for the

2011-5-26 Bioleaching was examined for copper extraction from a low grade ore using mesophilic and moderate thermophilic bacteria. Five equal size columns were used for the leaching of the ore. Sulfuric acid solution with a flow rate of 3.12 L·m−2·h−1 and pH 1.5 passed through each column continuously for 90 d. In the first and the second column, bioleaching was performed without agglomeration of

SEPARATION OF COPPER FROM A LEACHING

Total copper extraction from a liquor produced in the leaching process of the non-magnetic fraction of PCBs can be carried out in two theoretical contacts at an A/O ratio of 1:1, 25ºC, 10min of reaction, pH 3.5 and using 20% (v/v) D2EHPA diluted with 80% (v/v) kerosene, provided that aluminum and zinc are previously extracted.

Recovery of copper from alkaline glycine leach

2017-10-31 Extraction experiments were carried out using an aqueous solution containing 2 g/L Cu at Gly:Cu molar ratio of 3:1 and pH 11.The different phases were allowed to attain the set temperature (15–55 °C) and then contacted at an A:O 1:1 for 15 min at the set temperatures.Results in Table 2 show that within the studied temperature range, there is no influence on the copper extracted by either

A proposed solvent-extraction route for the treatment of

2021-3-19 A PROPOSED SOLVENT-EXTRACTION ROUTE FOR THE TREATMENT OF COPPER CYANIDE SOLUTIONS PRODUCED IN LEACHING OF GOLD ORES MR Davis Lycopodium Pty Ltd KC Sole Mintek J M W Mackenzie M J Virnig Henkel Australia Pty Ltd Henkel Corporation, MID TABLE OF CONTENTS ABSTRACT 1 1.0 INTRODUCTION 2 2.0 COPPER LEACHING IN CYANIDE

Copper Extraction from Flue Dust of Electronic Waste by

2020-10-23 Copper Extraction from Flue Dust of Electronic Waste by Electrowinning and Ion Exchange Process method involved ﬁlling the column with resin then ﬂowing the leaching solution into the column at constant ﬂow rate (70 mL/h). The second was a dynamic method, using

Minerals Free Full-Text Leaching of Primary Copper

Copper extraction from primary copper sulfide ore from a typical porphyry copper deposit from Antofagasta, Chile, was investigated after leaching with a chloride-ferrous media at two temperatures. The study focused on whether this chemical leaching system could be applied at an industrial scale. Leaching tests were conducted in columns loaded with approximately 50 kg of agglomerated ore; the

Chalcopyrite Leaching by Thermophilic Bacteria

2017-5-18 A 528-day column leaching experiment using Pinto Valley ore (Figure 26) showed that the organisms do make about a 10% contribution to the extraction of copper from this recalcitrant ore. This amount of copper was leached out during the first 250 days of leaching, and continued leaching did not increase the amount of copper

SEPARATION OF COPPER FROM A LEACHING SOLUTION

Yang et al. (2011) analyzed copper leaching from spent PCBs. The study reported copper extraction higher than 90 wt.% using sulfuric acid, hydrogen peroxide and a solid: liquid ratio of 1:10(g/mL), after 3h at 23ºC. According to Birloaga et al. (2013) 90 wt.% of copper can be leached from PCBs after two leaching

STUDIES ON THE CURING AND LEACHING KINETICS OF

2017-5-27 accelerate the extraction kinetics of copper ores and is widely used in copper operations. The curing process involves the addition of a highly concentrated sulfuric acid to the copper

Use of mesophilic and thermophilic bacteria for the

2011-5-26 Bioleaching was examined for copper extraction from a low grade ore using mesophilic and moderate thermophilic bacteria. Five equal size columns were used for the leaching of the ore. Sulfuric acid solution with a flow rate of 3.12 L·m−2·h−1 and pH 1.5 passed through each column continuously for 90 d. In the first and the second column, bioleaching was performed without agglomeration of

Extraction of Tin and Copper by Acid Leaching of PCBs

2013-2-2 valuable metals like tin and copper from the leachant. Metal extraction with nitric acid have been investigated by Cerna (1992), Zongcheng (1989)[8][9]. More than 95 % copper and lead extractions were achieved by Mecucci and Scott (2002) using nitric acid[10]. Purification of nitric acid

Extraction of copper and the co-leaching behaviour of

Extraction of copper and the co-leaching behaviour of other metals from waste printed circuit boards using alkaline glycine solutions. Resources, Conservation and Recycling. 154: Article No. 104624. Source Title. Resources, Conservation and Recycling. DOI. 10.1016/j.resconrec.2019.104624. ISSN. 0921-3449. Faculty. Faculty of Science and

A proposed solvent-extraction route for the treatment of

2021-3-19 A PROPOSED SOLVENT-EXTRACTION ROUTE FOR THE TREATMENT OF COPPER CYANIDE SOLUTIONS PRODUCED IN LEACHING OF GOLD ORES MR Davis Lycopodium Pty Ltd KC Sole Mintek J M W Mackenzie M J Virnig Henkel Australia Pty Ltd Henkel Corporation, MID TABLE OF CONTENTS ABSTRACT 1 1.0 INTRODUCTION 2 2.0 COPPER LEACHING IN CYANIDE

Leaching and solvent extraction purification of zinc

2021-1-15 The column leaching of low grade zinc oxide ore containing 5.2 The amount of 90.91% zinc extraction was found using 30% D2EHPA concentration at two stages solvent extraction.

<< Previous:Classify Mining Equipment Spiral Classifier For Washing Ore
>> Next:Seppi Multifirst Crushing Stones